News Center

our commitment to nickbaler
Position:Home > News Center <<    Return
How to buy horizontal clothing baler
Author : admin Time : 21-10-26 AllPageView : 254

Three aspects should be paid attention to when choosing a horizontal garment Baler machine:

In production, many companies or individuals need to use a baler for the purpose of convenient storage and transportation. There are many types of balers from the specific purpose of use, such as common horizontal clothing balers, cotton balers, and so on. Balers are widely used for loose compression packaging of cotton gauze, hemp, wool, paper skin, sponge, plastic, waste paper, waste aluminum, waste iron, stainless steel corners, etc.

A good baler can make the extruded packaging uniform in size and specific gravity density, thereby effectively reducing transportation and smelting costs, and more in line with the requirements of container transportation. Because of the versatility and commonality of the baler, the baler is used frequently and wears a lot. How to keep the performance of the baler stable, the longer it is used? This requires a certain amount of effort in purchasing. As a commonly used machine in production, look for the three key points of the manufacturer's qualification, reputation and mechanical quality when purchasing a horizontal garment baler.

1. Qualification of Baler machine manufacturer, only the scale of Baler machine manufacturer reaches a certain scale and the operating time reaches a certain number of years before there is enough experience in the production and maintenance of Baler machine.

2. The credibility of the Baler machine manufacturer, the people who do the production know that credibility is a treasure. In particular, the reputation of the manufacturer must be strictly inspected when purchasing and purchasing a Baler. Reputable manufacturers not only provide good service and follow-up services, but also provide more convenience when purchasing.

3. The quality of the baler and work-related accidents are unwilling to be seen by factories and individuals. How to avoid industrial accidents is actually very important when purchasing machinery. At this time, the advantages of the good quality of the old factory are highlighted. Quality is about work safety. If you don't want to deal with all kinds of troubles in the future, you still have to choose a reliable old factory or personally inspect and buy it.

服装net7.jpg

NICKBALER cooperates with people from all walks of life in an honest and trustworthy manner to create high-quality machinery and equipment!https://www.nickbaler.net


Recommended news
  • Process 10 tons of waste paper balers per day?

    How to choose the type to process 10 tons of waste paper every day?

    First of all, NICKBALER suggests that if the daily processing capacity reaches 10 tons, you can choose a horizontal baler, and the horizontal baler is divided into: semi-automatic baler and full-automatic baler; if the initial investment is limited, you can use the semi-automatic baler. Choose from the baler, and the smallest model NKW60BD can meet the production requirements;

    If you have a spacious site and sufficient funds, and have better development and planning in the future,NICKBALER suggests that you can choose a fully automatic baler; what is the difference between a semi-automatic baler and a fully automatic baler?

    1. The architecture is different

    2. Different packing methods

    3. The output is different

    NKW 250Q 01.jpg

    Waste paper baler is our main product for many years, we have very valuable experience, if you want to know more, please follow us https://www.nickbaler.net


  • How to clean the hydraulic system of the baler in the Philippines?

    1. String the baling pressrope of the hydraulic baler through the automatic spring tightening device behind the garbage compressor, and place it along the baling pressbelt groove, then tie the baling press belt to the pull-stop at the bottom of the baling pressgroove, and rotate the automatic spring tightening device 90 degrees , close the bottom door and lock

    2. Put the recycled waste paper, plastic and film waste into the hydraulic baler. When the material is loaded to the height of the pressure plate, close the door tightly and press the "press down" button. The equipment runs automatically and compacts. (The feeding height of materials other than cardboard can only be slightly higher than the bottom door)

    3. The pressure plate moves down and compresses to the maximum pressure and automatically returns to the fully open position. When compressing the baling pressconstraints, the platen stops at the preset position of the compressed material

    4. Open the door of the device and pass the tie rope through the bottom wire groove from front to back and back to the front through the pressure plate wire groove. Tighten the tie rope by hand and tie a knot. Push the baling press rod by hand, push the rod to a fixed position, and clamp it tightly. Press the "Up" button, the return trip of the oil cylinder will automatically turn out the bundled bundles. (When opening the lower door, it is not allowed to go in front of the door。

    Stand up to avoid accidental injury from the door popping open)

    5. After the bale is ejected, reset the bale rod to press down. Finally, remove the bales of waste paper and plastic waste before stacking them for storage, close and lock the door and enter the next packaging cycle task

    NKW250Q 02.jpg

    The hydraulic baler produced by NICKBALER has a simple structure, stable operation, low failure rate and easy cleaning and maintenance. You are welcome to buy https://www.nickbaler.net


  • Daily maintenance of automatic hydraulic balers in India

    1. Before starting the machine, check whether the components of the baler are in good condition; whether the screws and nuts of each component are loose, if so, you need to tighten the screws and nuts, repair personnel to deal with.

    2. Check whether there is any debris blockage inside the machine. The debris blockage will affect the work of the automatic hydraulic baler, so it needs to be removed;

    3. Check whether the knife group and the sliding part are short of oil. If the oil is short, it will cause serious wear on the parts. It must be oiled by dipping and dripping. Use a small stick to dip the oil and slowly drip it on it.

    牛粪01.jpg

    For more information on the fault maintenance and maintenance work of the automatic hydraulic baler, please pay attention to the website of NICKBALER Machinery Company: https://www.nickbaler.net


Recommended products
  • RDF baler's maintance
  • MSW Vertical Baler Machine
  • MSW Environmental protection equipment
  • MSW Horizontal Hydraulic baler machine
Recommended Assorises
  • Cyclone Separator
  • Diesel engine generator
  • Forklift Car
  • Wire Buckle For Baling
  • Iron Wire For Baling
  • Ton Bags/Jumbo Bag

Contact Us

  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • info@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China

Inquiry Us

Copyright © 2019 NICKBALER .rights reserved sitemap.html
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top