After the hydraulic baler has been used for a long time, the cylinder of the waste paper baler will crawl at a low speed. There are many reasons for this phenomenon. Let's take a look at the own reasons for the crawl of the cylinder of the waste paper baler:
1. The mixing of air into the hydraulic medium reduces the volumetric compression modulus of the liquid, changing from "rigid" to "elastic", resulting in unstable speed of the oil cylinder of the waste paper baler, which is one of the most common causes of crawling.
2. The sliding parts of the hydraulic baler cylinder are severely worn, strained and seized.
3. The process and accuracy problems of the oil cylinder of the waste paper baler: the size of the sealing groove is incorrect, the piston rod is bent in the full length or partially, the coaxiality of the cylinder bore and the guide sleeve is poor, and the straightness of the cylinder inner diameter Differences will cause crawling phenomenon.
NICKBALER seizes the trend of market development, strengthens innovation ability, and strives to introduce more Baler equipment that meets social needs. https://www.nickbaler.net
With the development of the economy and the continuous innovation of science and technology, more and more people are now paying attention to environmental protection, and environmental issues have also attracted attention, making the straw baler more popular, and its advantages are becoming more and more prominent. What are the advantages of the straw baler? ? Please see the analysis below
1. It is very versatile, mainly for packing some large or loose items.
2. Save storage space and recycle waste items.
3. The parts of the straw baler have high structural performance and good work efficiency, which reduces labor and transportation costs.
Only a high-quality baler can be better trusted by customers, and only by understanding the performance of the baler, can the straw baler be better utilized and used. Follow NICKBALER, let you grow more https://www.nickbaler.net
Choosing NICKBALER hydraulic baler, independent hydraulic system and servo system control, is the best choice for you to solve and recycle waste. https://www.nickbaler.net
The straw baler must be inspected and maintained at ordinary times to ensure that it can operate normally. While ensuring the characteristics and working efficiency of the straw baler, the following 4 points must be done:
1. Check the screws of each component of the straw baler on time to prevent falling off or bursting;
2. Pay attention to the moisture-proof, waterproof, anti-corrosion and fly-proof of some electrical equipment. The interior of the electrical control cabinet and the terminal block must be kept clean to prevent common failures of electrical equipment;
3. The machine of the straw baler is broken. The two heat-sealing rollers should be in the extended position to prevent the baling machine products from being scalded.
4. Lubricate the junction of each transmission gear, the oil filling hole of the bearing with seat and the oil pump of each movable component of the straw baler on time.
5. When the straw baler is filled with grease, it is not necessary to drop droplets on the transmission belt of the transmission system to prevent damage caused by deviation and vibration or aging of the transmission belt.
For more information about the fault maintenance and maintenance work of the straw baler, please pay attention to the website of NICKBALER M: https://www.nickbaler.net
1. The operator should be strictly trained and qualified before using the machine.
2. When the ambient temperature is less than 2°C above zero, the straw baler is not allowed to be used.
3. When the moisture content of straw and pasture is more than 65%, the straw baler is not allowed to be used.
4. The operator is not allowed to pour liquids such as bacteria water on the baler while bundling.
5. The straw baler is not allowed to have 2 boring cars per hour.
6. When using the motor as power, it is necessary to install the grounding wire.
7. It is necessary to clean up the small silt under the straw baler in time. If there are too many scraps, it may damage the machine parts.
If you are still unclear, you can continue to pay attention to our website https://www.nickbaler.net, and you are welcome to contact us at any time , thank you for reading.
