News Center
our commitment to nickbaler
Position:Home > News Center <<    Return
100 tons hydraulic Baler cylinder diameter
Author : admin Time : 20-05-31 AllPageView : 326

The key application of the hydraulic baler is to acquire the production and processing manufacturing industry and the metallurgical industry manufacturing industry. It can extrude various metal materials such as corner scraps, steel and wood shavings, scrap steel, scrap metal, scrap cables, scrap aluminum, aluminum wood shavings, car shells, and waste gasoline barrels. Rectangular, cylindrical and other pass-through waste materials. It is conducive to storage, transportation, refining and reuse.

The air also oxidizes the hydraulic oil air, accelerating the mildewing of the oil. To avoid air intrusion, pay attention to the following:

1. After overhauling and changing the oil, the air in the system software must be cleared according to the regulations before everything can work normally.

2. The oil suction pipe port of the hydraulic oil pump must not expose the oil surface, and the oil suction pipe line must be well sealed.

微信图片_20200514095623.jpg

3. Maintain the excellent sealing of the rotating shaft of the gasoline pump. Pay attention to the application of the "lip" oil seal when replacing the oil seal at this place. You cannot use the "single lip" oil seal. Has the function of sealing gas

The selection of suitable hydraulic oil plays the role of transmitting working pressure, moistening, water cooling, and sealing in the hydraulic transmission system. Improper selection of hydraulic oil is the key reason for the initial common failures and reduced performance of the hydraulic transmission system. The hydraulic oil should be selected according to the model required in the application review book. When the unique condition must be used for oil replacement, the performance should be the same as the original model. Different types of hydraulic oil can not be mixed application, to prevent the hydraulic oil from causing exothermic reaction, the performance changes greatly. The dark red, milky white, heavy odor hydraulic oil is moldy oil and cannot be applied.

Nick Baler can supply many kinds of baler machine,Waste paper baler machine,For more information ,please visit : www.nickbaler.net or www.nkbaler.com .even you can send us whatsAPP:00 86 15021631102 to free talk and inquiry as any  time

Recommended news
  • The solution to the pressure-free hydraulic system of the waste paper baler

    Common failure phenomenon: the entire hydraulic system of the waste paper baler has no pressure or insufficient pressure.

    Common causes of failure: the overflow valve fails, and the oil pump is not working properly.

    Solution: Check the type of overflow valve used in the waste paper baler equipment. If it is a pilot-operated overflow valve, there are many causes.

    1. The overflow valve is stuck or the solenoid fails. If the overflow valve is stuck, clean the overflow valve and reinstall it. If it is electromagnetic failure, you need to check whether the circuit is open, and check whether the coil of the overflow valve is burned. If there is a problem with the circuit, repair the circuit; if the coil burns out, the coil needs to be replaced.

    2. If it is the internal wear of the overflow valve, the overflow valve needs to be replaced at this time.

    微信图片_20200731152256 拷贝.jpg

    Waste paper baler is an environmental protection equipment that uses hydraulic principles to compress waste paper and waste cardboard into blocks, which is beneficial to waste paper storage, transportation and utilization. https://www.nickbaler.net


  • The oil pump of the horizontal waste paper baler is overheated.

    The oil pump of the horizontal waste paper baler generally has a plunger pump and a vane pump. The reasons for the loud noise of the oil pump system may include: loosening of the fastening screws of the oil pump; wear of the power bearing or stator of the oil pump; serious damage to the oil pump; inside the oil tank Air bubbles, poor oil intake of the hydraulic pump and other reasons will cause this problem. At this time, we should analyze the specific situation and solve the problem of excessive noise in the hydraulic waste paper baler oil pump!

    The possible causes of the failure of the oil pump overheating problem are that the oil pipe is blocked, causing the pressure of the hydraulic oil to increase; the power of the oil pump is too large and overloaded; the hydraulic oil is used unreasonably and the viscosity is too high.

    The quality of the hydraulic oil of the hydraulic waste paper Baler has a great influence on the hydraulic pump. The replacement cycle of the plunger pump is generally one year. If the plunger pump is noisy, it is recommended to consider replacing the plunger pump plunger.

    IMG_20190508_075449 拷贝.jpg

    The waste paper baler is used to extrude waste paper and similar products under normal conditions to greatly reduce the volume, so as to reduce the transportation volume, save the freight, and increase the benefits for the enterprise. https://www.nickbaler.net


  • The first refueling method of horizontal waste paper baler

    The method of refueling the newly purchased waste paper baler equipment before starting, and the oil leakage problem of the newly purchased horizontal waste paper baler equipment has been plagued by the majority of user groups, so how to solve the problem of the waste paper baler oil Well, let's take a look at the waste paper baler equipment with Nick Machinery. What should I pay attention to when using the refueling method?

    1. The oil leakage of the waste paper baler is relatively severe. If the oil pump pressure is adjusted too high, the wear of the movable parts will increase the sealing gap, the sealing device will be damaged, the viscosity of the oil used in the waste paper baler will be too low, etc., which will increase the leakage. After clarifying the reason, adopt the corresponding steps to eliminate it.

    2. Poor heat dissipation, insufficient heat dissipation area of ??the fuel tank, too little oil storage in the fuel tank, resulting in too fast oil circulation, poor cooling of the waste paper Baler cooler, such as failure of cooling water supply or failure of electric fans, high ambient temperature, etc. All are the reasons for poor heat dissipation.

    3. The system does not have an unloading circuit or the unloading circuit does not perform well. When the waste paper baler system does not need to pressurize the oil, the oil is still overflowing to the fuel tank under the working pressure set by the overflow valve or at the unloading pressure Return to the fuel tank downstream in a higher environment. 

    4. Misuse of oil with too high viscosity, the waste paper baler will cause excessive hydraulic loss.

    3-2废纸 (2).jpg

    The horizontal waste paper baler can be customized in different models according to the different needs of customers.https://www.nickbaler.net

Recommended products
  • Cow dung dewatering machine manufacturers
  • Cow dung dring machine price
  • Cow dung compressor, Cow Dung Block Press
  • NK8060T15 Diesel Engine Baler
Recommended Assorises
  • Sack for Used Clothes Packing
  • Semi automatic Strapping Machine
  • Wooden Crusher /Wooden Shredder
  • Hydraulic Forklift Truck
  • Strapping Baling Wire for Baler
  • Pipe Shredder with Hydraulic Balers
Contact Us
  • +86 29 86031588   (Fax)
  • 008615021631102
  • ligoodboy2010
  • sales@nkbaler.com
  • East Qunsheng Road Wuxi City,Jiangsu,China
Inquiry Us
Copyright © 2019 NICKBALER .rights reserved
Whats App Skype Shaanxi Nick Machinery
Equipment Co. LTD
go back to the top