The cutting edge of the metal shearing machine blade should be kept sharp, and the cutting edge should be blunt or damaged. It should be sharpened or replaced in time. When multiple people are operating, there should be a special person to command, and the cooperation should be coordinated.
It is forbidden to cut two materials of different specifications at the same time on the gantry shearing machine, and no overlapping cutting is allowed. It is forbidden to use the handle to facilitate the operation under the pressure plate when cutting the material. When cutting the material, it should be pressed by another iron plate. At least 200 mm.
When the metal shearing machine has serious oil leakage or abnormal phenomena during work, it should be shut down immediately, the cause should be analyzed and the fault should be eliminated, and it should not be forced to run with illness.
When adjusting the pump, valve, and pressure gauge of the metal shearing machine, it must be carried out by experienced skilled workers. If the pressure gauge is found to be faulty, it should be checked or updated immediately.
The steel plate cut by the metal shearing machine should be transported away in time, and stacked neatly according to the specifications, and the leftover materials should be placed in the specified place.
The NICKBALER metal shearing machine has reliable performance, convenient operation and simple maintenance. Diesel engines can be used as power where there is no power supply. https://www.nickbaler.net
1. The structure of the hydraulic MSW horizontal baler is mainly closed-door and open-door structure. The closed-door structure can make the density of the bales larger, which is suitable for the compression and baling machine of more items, hydraulic opening and closing, manual bundling, safe and fast operation.Open door structure, both sides are locked, continuous delivery, automatic threading (wire) or hooking (wire), automatic bundling, and faster operation.
2. Imported PLC programming, LCD screen, simple, clear and clear at a glance.
3. The connection method of the ball joint hydraulic cylinder is not prone to failure and increases the use time of the cylinder.
4. Thickened steel plate, the fuselage is firmer.
5. The oil circuit is standardized, and the hydraulic oil pipe hose is rarely used, which avoids the oil leakage phenomenon caused by the loosening of the screw due to the vibration of the machine, and also reduces the potential safety hazard.
6. A variety of operation methods.
7. Energy saving, low noise.
All of NICKBALER Machinery's balers can do the job you need and are very easy to operate. If you have any questions, you can go to NICKBALER's website to learn.https://www.nickbaler.net.
NK-T90L double-chamber Clothes baler The double-chamber clothes baler is used for the compression and Baling Machine of old clothes, towels, rags, fabrics and other materials.
It is also known as an open double-chamber baler, a rotatable dual-chamber baler, or a two-case baler. This baler is designed with two compression chambers. The two compression chambers are rotated and balanced by a central shaft. The double cavity can realize feeding in one cavity and compressing the bale in the other cavity, which greatly improves the work efficiency. When the block is compressed,the cavity will have a signal to automatically carry the box, so that it can be easily bundled. This double-chamber clothes baler combines the dual advantages of the double-chamber baler and the suitcase baler, and is currently the most efficient, user-friendly and labor-saving garment baler in the industry.
The double-chamber clothes baler produced by NICKBALER has always had its own uniqueness, because we believe that only by making our products more refined and more distinctive, our sales will be broader. If necessary, feel free to contact us at 86-29-86031588
The Baling Machine generally consists of five parts: the pressing part, the crushing part, the electrical control part, the pressure control part and the power part. So what are its characteristics? Let's find out
1. The compression ratio is large, and the maximum capacity can be reduced by 50 times.
2. Save storage space, save transportation and storage costs
3. The compressed PS material is easy to recycle
4. Large-scale models can operate synchronously with the conveyor belt to improve production efficiency