Nowadays, many scrap metal recycling, scrap automobile recycling and other related metal industries choose to use gantry shears. So what is gantry shears and why so many companies choose gantry shears. Today I will explain to you what is gantry shears. Cutting machine.
The gantry shearing machine is a machine specially used for cutting metal, etc. It is a machine that can turn waste into treasure, and there are many different models of the gantry shearing machine corresponding to different cutting sizes, so the gantry shearing machine is very Diversity.
The gantry shearing machine is operated by electricity, and the gantry shearing machine is a double-knife combination, which is a common combination of upper and lower knives, so that the cutting is faster, more stable, and easier to cut.
For other traditional cutting machines, the gantry shearing machine has a longer service life, more stable, safer, and more convenient, and it can cut more sizes and a wider range.
Based on the above characteristics, it is not unreasonable that more and more large and medium-sized enterprises will choose gantry shears. It is believed that gantry shears will also bring better economic benefits to many enterprises.
NICKBALER gantry shearing machine has the advantages of time-saving, convenient operation, labor-saving, strong bearing capacity, cost-saving, stable and reliable. https://www.nickbaler.net
With the development of the economy and the continuous innovation of science and technology, more and more people are now paying attention to environmental protection, and environmental issues have also attracted attention, making the straw baler more popular, and its advantages are becoming more and more prominent. What are the advantages of the straw baler? ? Please see the analysis below
1. It is very versatile, mainly for packing some large or loose items.
2. Save storage space and recycle waste items.
3. The parts of the straw baler have high structural performance and good work efficiency, which reduces labor and transportation costs.
Only a high-quality baler can be better trusted by customers, and only by understanding the performance of the baler, can the straw baler be better utilized and used. Follow NICKBALER, let you grow more https://www.nickbaler.net
Choosing NICKBALER hydraulic baler, independent hydraulic system and servo system control, is the best choice for you to solve and recycle waste. https://www.nickbaler.net
The straw baler must be inspected and maintained at ordinary times to ensure that it can operate normally. While ensuring the characteristics and working efficiency of the straw baler, the following 4 points must be done:
1. Check the screws of each component of the straw baler on time to prevent falling off or bursting;
2. Pay attention to the moisture-proof, waterproof, anti-corrosion and fly-proof of some electrical equipment. The interior of the electrical control cabinet and the terminal block must be kept clean to prevent common failures of electrical equipment;
3. The machine of the straw baler is broken. The two heat-sealing rollers should be in the extended position to prevent the baling machine products from being scalded.
4. Lubricate the junction of each transmission gear, the oil filling hole of the bearing with seat and the oil pump of each movable component of the straw baler on time.
5. When the straw baler is filled with grease, it is not necessary to drop droplets on the transmission belt of the transmission system to prevent damage caused by deviation and vibration or aging of the transmission belt.
For more information about the fault maintenance and maintenance work of the straw baler, please pay attention to the website of NICKBALER M: https://www.nickbaler.net
1. The operator should be strictly trained and qualified before using the machine.
2. When the ambient temperature is less than 2°C above zero, the straw baler is not allowed to be used.
3. When the moisture content of straw and pasture is more than 65%, the straw baler is not allowed to be used.
4. The operator is not allowed to pour liquids such as bacteria water on the baler while bundling.
5. The straw baler is not allowed to have 2 boring cars per hour.
6. When using the motor as power, it is necessary to install the grounding wire.
7. It is necessary to clean up the small silt under the straw baler in time. If there are too many scraps, it may damage the machine parts.
If you are still unclear, you can continue to pay attention to our website https://www.nickbaler.net, and you are welcome to contact us at any time , thank you for reading.
