With the reform and opening up, my country’s economy has developed rapidly, the development of various industries has matured, and the packaging industry has become a relatively stable development method. From the current market situation, hydraulic balers are used in packaging machinery. The industry has played a very important role and has gradually become stable, and people’s awareness of environmental protection has been continuously strengthened. Hydraulic balers have begun to enter people’s lives and have developed into the mainstream of the packaging industry. Can hydraulic balers become the packaging industry? What is the trend of development?
With the rapid development of the hydraulic baler industry, some small packaging machinery companies have relatively weak technology, and the balers produced are of poor quality and unstable performance, and some are even imitating other products.
Therefore, the common phenomenon in the packaging machine industry is weak competitiveness and high degree of imitation. This also makes slow economic growth and low efficiency a development problem. The main reason is that companies cannot grasp the laws of market development and make companies move in the wrong direction. For development, it is necessary to make adjustments to determine a new development direction in response to the various unfavorable conditions.
my country's hydraulic balers can promote the development of some industries, and these industries can also stimulate the demand for packaging. At the same time of consumption, they promote the development of hydraulic balers, transforming from protection to green and safe, and hydraulic balers can be very good To meet the needs of development, there will be a very broad space for development in the future.
NICKBALER has made remarkable achievements in the baler industry, and actively develops new products with low cost and high production efficiency for customers to meet customer needs. www.nickbaler.net
1. Shearing oil cylinder: It is a double-acting single-piston rod type oil cylinder. Its front end is connected with the frame, and the rear part is connected with the machine base by lower pins (one on each side), and the frame shaft is driven by the push-out and retraction of the piston rod. swing. Implement the cutting action.
2 Frames: The frame is an important flowing part. The left side of the front part is equipped with an upper shear. The middle is connected with the frame by the frame shaft and frame bushing, and the rear is connected with the upper pin shaft of the shear cylinder. .
3. Machine base: It is composed of welding base, left frame, right frame, etc. The right frame and the left frame of the base are welded parts, of which the right and left frames use inner and outer (double) side plates, and the structure is firm.
4. There is a platform and a slope at the front of the machine base, and a lower shear is installed between them. There is a large hole in the middle of the left and right frames for installing the frame, and there is a hole in the rear for installing the shearing cylinder. The front part of the frame is welded with a pressure material cylinder bracket, which is used to install the pressure material cylinder and other portal metal shears.
NICKBALER has rich production experience and integrated services. Using our balers can greatly improve work efficiency and reduce human and financial expenditures. Contact us at 86-29-86031588 or https://www.nkbaler.net/.
The semi-automatic plastic bottle Baling machine is mainly used for Baling machinewaste products, but because it is semi-automatic packing, it needs to be worn manually. Many friends do not know how to operate it. NKBALER has summarized the following points based on experience , I hope it can help everyone.
Semi-automatic plastic bottle Baling machine strapping method:
1. Install the pp tape on the pp tape mounting roller.
2. There is a brake pad connected to the "L"-shaped metal rod on the roller and the fuselage. There are two white rollers on the metal rod. middle.
3. After the upper and lower extensions are inserted, press the connecting spring on the front of the upper extension (the machine is turned on at this time).Line packing.
The above is the method of wearing the semi-automatic plastic bottle baler. I believe that through the introduction, everyone has a deeper understanding of how to operate the plastic baler. If you have other questions, you can leave a message for consultation.https://www.nkbaler.net/.
The electrical control part of the waste paper baler is mainly composed of PLC, motor and electrical components of relays and switches. The most vulnerable parts of these parts are the motor and electrical components. Today we share with you: baler electrical control Box Daily Precautions
1. Pay attention to the grounding, lightning protection, rainproof and moisture-proof of the power cord.
2. Non-professional operators of the electric control cabinet are prohibited from using it.
3. Pay attention to the antifreeze work of the motor and the long-term overload of the motor. Effective prevention of these two items can greatly reduce the damage to the motor, thereby maintaining the normal Baling machineof the waste paper baler.
4. Pay attention to the button operation of the console part, do not use too much force on the switch button, and prevent misoperation to avoid damage caused by short circuit.
The above 4 points are what I want to share with you today, I hope it can help you!
NKBALER provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other Baling machineequipment, company website: https://www.nkbaler.net/. Tel: 86-29-86031588, looking forward to contacting your cooperation!
